Welcome to Chembond Products
Supplying fibres for all cement, mortar, screed and concrete

Tel / Fax: 01773 742233

Rendering House Walls

Strong fibres are perfect for a scratch coat.

The first coat is applied 3mm to 5mm thick with a 3 to 1 sand and cement mortar mix. It is important that about 250ml of waterproofer is added when using 20kg of cement.

The second coat is applied when the water of the first coat has sucked into the brickwork. This can take anything from 10 minutes to 30 minutes, sometimes a little longer.

Then apply a second coat of render 5mm to 8mm thick, then scratch back to the first coat. This base coat is perfect for receiving a traditional wet dash. For a dry dash, Tyrolean, for a smooth render apply a coat of render using fine fibres.